-
-
Blogs
-
Equipment
-
Contact
The company boasts strong capabilities and an annual production capacity of 36,000 tons. We can design and develop products tailored to customer needs.
Product Center
The company has an annual production capacity of 36,000 tons and is capable of manufacturing the following products: elbows, bent pipes, tees, reducers, end caps, flanges, bellows expansion joints, sleeve expansion joints, rotary expansion joints, non-metallic expansion joints, metal flexible hoses, rubber flexible connectors, expansion joints, insulated joints, waterproof sleeves, supports and hangers, electric dampers, pipeline filters, wear-resistant pipe fittings, corrosion-resistant pipe fittings, and thermal insulation pipe fittings.
The inner and outer surfaces of the bent pipe shall be smooth and free from defects that could compromise strength or appearance, such as knots, scratches, or laps. Upon detection of any defects, they shall be ground down to repair them. The reduction in wall thickness at the ground areas shall be no less than 93.5% of the original wall thickness. The ground areas must be smoothly rounded, and their defect-free status shall be confirmed by means of dye penetrant testing or magnetic particle inspection until no defects remain.
The inner and outer surfaces of the bent pipe shall be smooth and free from defects that could compromise strength or appearance, such as knots, scratches, or laps. Upon detection of any defects, they shall be ground down to repair them. The thickness reduction at the ground area shall not be less than 93.5% of the original wall thickness. The ground areas must be smoothly rounded, and their defect-free status shall be confirmed by means of dye penetrant testing or magnetic particle inspection until no defects remain.
The inner and outer surfaces of the bent pipe shall be smooth and free from defects that could compromise strength or appearance, such as knots, scratches, or laps. Upon detection of any defects, they shall be ground down to repair them. The thickness reduction at the ground area shall not be less than 93.5% of the original wall thickness. The ground areas must be smoothly rounded, and their defect-free status shall be confirmed by means of dye penetrant testing or magnetic particle inspection until no defects remain.
Bent pipes are bent using a complete set of bending equipment and are divided into two processes: cold bending and hot pushing.
Phone -8615226756063
Phone -8616631731810
Email -czlsg@163.com
Add: Industrial Zone, Yanta Road, Yanshan County, Hebei Province
