-
-
Blogs
-
Equipment
-
Contact
Upholding the corporate spirit of “Integrity, Harmony, Pragmatism, and Innovation,” we remain committed to a business philosophy that puts people first, embraces technological innovation, and emphasizes integrity and pragmatism.
Common Problems and Solutions in the Use of Spring Supports and Hangers
Release time:
Oct 29,2020
Spring supports and hangers are primarily used in boiler bodies, as well as in steam, water, flue gas, and air ducts and the suspended sections of burners in power plants. They are also employed in petrochemical equipment and other areas where it is necessary to reduce displacement-induced stresses. After prolonged use, various components of spring supports and hangers may experience wear and aging, and occasional malfunctions may occur. To ensure the continued reliable operation of these supports and hangers, users must carefully familiarize themselves with their common issues and corresponding troubleshooting methods.
Spring support hangers It is primarily used in the boiler body, as well as in steam, water, flue gas, and air ducts and the suspension sections of burners in power plants, and also in petrochemical equipment and other areas where it is necessary to reduce displacement stresses. Spring support hangers After prolonged use, various components will experience wear and tear as well as aging, and occasional malfunctions may occur. To avoid any disruption, Spring support hangers For its use, users need to take a serious look at it. Spring support hangers Frequently Asked Questions and Solutions.
Spring support hangers Common Issues and Solutions During Use:
1. Spring support hangers During operation, if the device stops halfway through without running, one possibility is that the oil level in the tank is insufficient; another possibility is that the starting capacitor has failed. Solution: Yes, I can. First, add an adequate amount of the appropriate type of hydraulic oil to the tank, then proceed with debugging. If the issue remains unresolved, the only option is to replace the capacitor.
2. Spring support hangers In the event of automatic descent or operation when no one is present, the solution is to check whether there are foreign objects inside the solenoid valve. If any are found, simply use an air gun to blow them out or clean them with gasoline.
3. If Spring support hangers It’s running but unable to descend normally. Solution: Please check whether the indicator light on the solenoid valve is lit. If it’s not lit, check whether the two terminals of the solenoid valve are loose, which could indicate an open circuit.
4. If it's rainy and overcast. Spring support hangers Not functioning. Solution: Check whether the control box is damp, and use a hairdryer to dry it. Immediately 。
5. If Spring support hangers If the oil pipe is leaking, first check whether there is any damage at the connection points, and then inspect the seals for any cracks or tears. Solution: Replace the seals or the entire oil pipe.
6. If Spring support hangers The cylinder is leaking oil. Please check whether the sealing ring is damaged. The solution is to replace it with a new sealing ring.
You can also learn more about industry trends.
Phone -8615226756063
Phone -8616631731810
Email -czlsg@163.com
Add: Industrial Zone, Yanta Road, Yanshan County, Hebei Province
